WEFLO
Resilient Seated Gate Valve
Size 14 – 24 Inch
Manufactured to AWWA C515-15 Standard. Stainless Steel Stem and Bolting is standard. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard. NSF-61 Certified for use in Drinking Water Systems. NSF-372 Certified as Lead-Free
- Complies with AWWA C515 Standard.
- Heavy duty handwheel and attachment nut.
- Flange end to ANSI B16.1 Class125.
(Other flange types available upon request) - NPT plug on body(optional).
- Eye-Bolts on bonnet for ease of handling.
- UL/ULC Listed and FM Approved
- Certified to NSF/ANSI 61 & 372
Swing Check Valve
Size 14 – 24 Inch
Lever and Weight Swing Check valves manufactured to AWWA C508 Standard. Resilient seated disc seals against integral bronze seat ring. Full waterway design. Available in 2” through 24” sizes, Flanged ends, ANSI B16.1, Class 125. 200 psi Water Working Pressure rating in sizes through 12”, 150 psi in 14”-24” sizes. Also available in Lever & Spring configuration. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard
- Complies with AWWA C515 Standard.
- Heavy duty handwheel and attachment nut.
- Flange end to ANSI B16.1 Class125.
(Other flange types available upon request) - NPT plug on body(optional).
- Eye-Bolts on bonnet for ease of handling.
- UL/ULC Listed and FM Approved
- Certified to NSF/ANSI 61 & 372
Butterfly Valve
Size 2 – 12 Inch
UL / FM at 300 psi. Single piece through shaft. The Weflo UL / FM Butterfly Valve – Wafer Style has a Vulcanized Disc design that provides bubble tight shut-off every time. Low torque operation – high cycle life. Gear Operated. Includes built-in Supervisory (Tamper) Switch. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550 Standard.
- Meet or exceed the requirements of EN 593 and MSS SP-67 Standard
- Single piece throught shaft
- Splined drive
- Outdoor and indoor rated
- Vulcanized seat design for bubble tight shutoff
Y Strainer
Size 14 – 24 Inch
UL Listed Y Strainer meets or exceeds the requirements of UL 321 Standard NPT Blow-Off Outlet on Cover. ASTM A276, Type 304 Stainless Steel Screen. Excellent flow characteristics. Low pressure loss at high flow rates. Flanged Ends to ANSI / ASME B16.1, Class 125. Other flanges available on request. Fusion Bonded Epoxy Coated Interior and Exterior to AWWA C550
- Meet or exceed the requirements of UL 321 Standard
- NPT or BSPT blowoff outlet on cover
- Recessed seat in body assure accurate screen alignment
- Roundholes with 60 degress staggered
- Excellent flow characteristics and low pressure losses at high flow rates
